• 3 string cigar box guitar neck - fretted and profiled

  • £90.75

  • Click here to be notified by email when 3 string cigar box guitar neck - fretted and profiled becomes available.

  • Description

    2 piece cherrywood neck, with shaped headstock and through-body lamination  pre-slotted black walnut fretboard, 25/ 1/2 inch scale, with pre-cut nut slot, all glued-up, trimmed, fretted and profiled. The neck-through section is pre-cut, ready to install into a box of your choice, and can be installed either tight against the underside of the top of the box, or left "floating" with a gap between the neckstick and underside of the box top.

    These necks are virtually ready to install, just needing drilling for the machineheads and strings,  final sanding and a finish of your choice.

    Position dots are installed into the fretboard, together with side dot markers. The neck is fretted with Van Gent jumbo gauge hard nickel silver fretwire. Also supplied are a 5mm machine screw for the nut, and two mahogany tailpiece trims, thick and thin. The machine screw nut simply drops into the pre-cut slot and will give you a nice action suitable for both fretted and slide playing. It's very simple to raise the action should you wish by putting in a shim of veneer or thin plastic in the nut slot, or you can lower it by filing the slot a little deeper for super-low action.

    These necks are available in 3 sizes, to suit long (280-300mm), medium (240-275mm) or short (220-240mm) boxes. Also included are set of illustrated instructions of how to install the neck for the best results.

    All the hard work has been done for you, and these are exactly the same necks as installed in my ChickenboneJohn cigar box guitars.

  • 3 string cigar box guitar neck - fretted and profiled
  • 3 string cigar box guitar neck - fretted and profiled
  • 3 string cigar box guitar neck - fretted and profiled
  • 3 string cigar box guitar neck - fretted and profiled
  • 3 string cigar box guitar neck - fretted and profiled
  • 3 string cigar box guitar neck - fretted and profiled

Share this product