- Home
- Pickups
Pickups
Chickenbone John handwound "drop -in" 3 pole pickup
£39.50
3 pole single coil pickup for cigar box guitar, handmade in our workshop. Strictly limited numbers. These are individually handmade, from the bobbins to the final wrap. We wax pot them to reduce any microphonic effect and wrap the coil with tape to protect it and give a neat finish. Alnico 5 magnets Scatterwound with 42g enamelled wire 13mm po...
Chickenbone John handwound "height adjustable" 3 pole pickup
£49.50
3 pole single coil pickup for cigar box guitar, handmade in our workshop. Strictly limited numbers. These are individually handmade, from the bobbins to the final wrap. We wax pot them to reduce any microphonic effect and wrap the coil with tape to protect it and give a neat finish. Alnico 5 magnets Scatterwound with 42g enamelled wire 13mm po...
Artec aged copper humbucker
Artec aged copper humbucker
£22.00
Full sized humbucker with aged copper cover, supplied with black mounting ring, adjuster screws and springs and mounting screws. Alnico 5 bar magnet 8.35kOhm resistance Great for 6 string, 4 or 3 string guitars.
Artec twin rail strat humbucker pickup.
£18.50
Super neat and powerful twin rail humbucker pickup, Strat sized. Cream bobbin with chromed rails 12kOhm resistance 5 conductor wiring, so it can be easily coil tapped with SPDT or DPDT switch (not included)
Artec Memphisys 66 soundhole humbucking pickup
£42.50
A great new retro-style pickup for your acoustic guitar. Simple drop-in fitting, with endpin jack included and pre-wired - no soldering required. Humbucking pickup with tone and volume controls built-in, quality braided shielded wiring.
Artec Vertex-M soundhole pickup for acoustic guitar - humbucker/piezo/mic blender
£72.50
Easy to install soundhole pickup with the added bonus of being able to combine and blend piezo transducer, microphone and magnetic pickups. Complete with prewired endpin jack - no soldering needed. Stacked humbucker with Neodymium magnet, active pre-amp. Volume controls for mic, piezo and magnetic pikcup, plus master volume.
Artec MSP50 soundhole pickup for acoustic guitar
£27.50
MSP 50 is a single coil passive soundhole magnetic pickup- easy to fit drop-in design, complete with endpin jack- no soldering needed. Slim design with built in mounting clamps for an unobtrusive easy fit. The MSP 50 features adjustable pole pieces.
Artec Vertex-P soundhole pickup for acoustic guitar
£46.50
Stacked humbucker design, neodymium magnet, tone and volume controls built in. This is a passive pickup, so doesn't need batteries. Easy to fit - simple drop- in design, with endpin jack all pre-wired, no soldering needed.
Bill Lawrence FT-145 Acoustic Pickup
Bill Lawrence FT-145 Acoustic Pickup
£54.50
The Original Bill Lawrence FT-145 magnetic soundhole pickup installs quickly and easily on a standard 6 or 12 string steel string acoustic guitar. The FT-145 is simple to install with a unique spring-loaded quick-mount and does not require any drilling, soldering or modifications to your guitar. This high output, low noise pickup does not requir...
Bill Lawrence A-300 Acoustic Pickup
Bill Lawrence A-300 Acoustic Pickup
£52.25
NEW AND IMPROVED - now fitted with Neutrick Rean jack plug and soft-feel low noise Bill Lawrence USA cable. The Original Bill Lawrence A-300 magnetic soundhole pickup installs quickly and easily on a standard 6 or 12 string steel string acoustic guitar. The A-300 is simple to install with a unique spring-loaded quick-mount and does not require a...
Bill Lawrence XL -500 Dimebag Darrel Humbucker pickup - LEAD / BRIDGE position
£54.25
HOT blade pickup by Bill Lawrence USA. 11.7kOhm resistance. 5 wire conductor so you can wire this as a straight humbucker or coil split it, phase switch etc. as you please with the addition of a DPDT or SPDT switch (not supplied). Comes with deep mounting ring for bridge position mounting . Available in black or cream. As used by Dimebag Darrel ...
Bill Lawrence L -500R Humbucker pickup NECK / RHYTHM position
£54.25
The original blade humbucker pickup by Bill Lawrence USA. 7.9kOhm resistance. 5 wire conductor so you can wire this as a straight humbucker or coil split it, phase switch etc. as you please with the addition of a DPDT or SPDT switch (not supplied). Comes with shallow mounting ring for neck position mounting . Available in black or cream. Made in...