Guitar Parts

{"id":409564728,"title":"3 string cigar box guitar neck - fretted and profiled","handle":"3-string-cigar-box-guitar-neck-fretted-and-profiled","description":"\u003cp\u003e2 piece cherrywood neck, with shaped headstock and through-body lamination  pre-slotted Blackwood Tek fretboard, 25\/ 1\/2 inch scale, with pre-cut nut slot, all glued-up, trimmed, fretted and profiled. The neck-through section is pre-cut, ready to install into a box of your choice, and can be installed either tight against the underside of the top of the box, or left \"floating\" with a gap between the neckstick and underside of the box top.\u003c\/p\u003e\n\u003cp\u003eThese necks are virtually ready to install, they just needing drilling for the machineheads and strings, final sanding and a finish of your choice.\u003c\/p\u003e\n\u003cp\u003ePosition dots are installed into the fretboard, together with side dot markers. The neck is fretted with Van Gent Xtra jumbo gauge hard nickel silver fretwire. Also supplied are a 5mm machine screw for the nut, and two mahogany tailpiece trims, thick and thin. The machine screw nut simply drops into the pre-cut slot and will give you a nice action suitable for both fretted and slide playing. It's very simple to raise the action should you wish by putting in a shim of veneer or thin plastic in the nut slot, or you can lower it by filing the slot a little deeper for super-low action.\u003c\/p\u003e\n\u003cp\u003eThese necks are available in 3 sizes, to suit long (280-300mm), medium (240-275mm) or short (220-240mm) boxes. Also included are set of illustrated instructions of how to install the neck for the best results.\u003c\/p\u003e\n\u003cp\u003eAll the hard work has been done for you, and these are exactly the same necks as installed in my ChickenboneJohn cigar box guitars. A good neck is the key to getting a cigar box guitar that is easy to play and that will play in tune - this is the ideal way to start your next guitar project.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ohXauQXIrjw\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2015-01-23T08:43:00+00:00","created_at":"2015-01-23T08:43:28+00:00","vendor":"chickenbonejohn","type":"Guitar Neck","tags":["3 String","Blackwood","Cherry","ChickenboneJohn","Cigar Box Guitar","Cigar Box Kit","Fretboard","Fretwire","Guitar Parts","Handmade","Necks","Sapele","Slotted","Wood"],"price":9075,"price_min":9075,"price_max":9075,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1119016648,"title":"For long box","option1":"For long box","option2":null,"option3":null,"sku":"N0033","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3 string cigar box guitar neck - fretted and profiled - For long box","public_title":"For long box","options":["For long box"],"price":9075,"weight":960,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":1119016652,"title":"For medium box","option1":"For medium box","option2":null,"option3":null,"sku":"N0032","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3 string cigar box guitar neck - fretted and profiled - For medium box","public_title":"For medium box","options":["For medium box"],"price":9075,"weight":960,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":1119016656,"title":"For short box","option1":"For short box","option2":null,"option3":null,"sku":"N0031","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"3 string cigar box guitar neck - fretted and profiled - For short box","public_title":"For short box","options":["For short box"],"price":9075,"weight":960,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousefull2.jpg?v=1565266860","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouse3pack.jpg?v=1565266926","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousehead.jpg?v=1565266950","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouseheel.jpg?v=1565266989","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktailthin.jpg?v=1565267055","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktail.jpg?v=1565267069"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousefull2.jpg?v=1565266860","options":["Title"],"media":[{"alt":"3 string cigar box guitar neck, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386716204,"position":1,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousefull2.jpg?v=1565266860"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousefull2.jpg?v=1565266860","width":500},{"alt":"3 string cigar box guitar neck collection, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386748972,"position":2,"preview_image":{"aspect_ratio":1.577,"height":317,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouse3pack.jpg?v=1565266926"},"aspect_ratio":1.577,"height":317,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouse3pack.jpg?v=1565266926","width":500},{"alt":"3 string cigar box guitar neck headstock, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386781740,"position":3,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousehead.jpg?v=1565266950"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhousehead.jpg?v=1565266950","width":500},{"alt":"3 string cigar box guitar neck, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386814508,"position":4,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouseheel.jpg?v=1565266989"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fullhouseheel.jpg?v=1565266989","width":500},{"alt":"3 string cigar box guitar neck, tail piece, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386847276,"position":5,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktailthin.jpg?v=1565267055"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktailthin.jpg?v=1565267055","width":500},{"alt":"3 string cigar box guitar neck, tail piece, fretted and profiled in sapele, cherrywood with blackwoodTek fretboard and Van Gent fretwire.","id":11386880044,"position":6,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktail.jpg?v=1565267069"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/necktail.jpg?v=1565267069","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e2 piece cherrywood neck, with shaped headstock and through-body lamination  pre-slotted Blackwood Tek fretboard, 25\/ 1\/2 inch scale, with pre-cut nut slot, all glued-up, trimmed, fretted and profiled. The neck-through section is pre-cut, ready to install into a box of your choice, and can be installed either tight against the underside of the top of the box, or left \"floating\" with a gap between the neckstick and underside of the box top.\u003c\/p\u003e\n\u003cp\u003eThese necks are virtually ready to install, they just needing drilling for the machineheads and strings, final sanding and a finish of your choice.\u003c\/p\u003e\n\u003cp\u003ePosition dots are installed into the fretboard, together with side dot markers. The neck is fretted with Van Gent Xtra jumbo gauge hard nickel silver fretwire. Also supplied are a 5mm machine screw for the nut, and two mahogany tailpiece trims, thick and thin. The machine screw nut simply drops into the pre-cut slot and will give you a nice action suitable for both fretted and slide playing. It's very simple to raise the action should you wish by putting in a shim of veneer or thin plastic in the nut slot, or you can lower it by filing the slot a little deeper for super-low action.\u003c\/p\u003e\n\u003cp\u003eThese necks are available in 3 sizes, to suit long (280-300mm), medium (240-275mm) or short (220-240mm) boxes. Also included are set of illustrated instructions of how to install the neck for the best results.\u003c\/p\u003e\n\u003cp\u003eAll the hard work has been done for you, and these are exactly the same necks as installed in my ChickenboneJohn cigar box guitars. A good neck is the key to getting a cigar box guitar that is easy to play and that will play in tune - this is the ideal way to start your next guitar project.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ohXauQXIrjw\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":1203742343212,"title":"Blackwood Tek Fretboards","handle":"blackwood-tek-fretboards","description":"\u003cp\u003e\u003cstrong\u003eBlackwood Tek guitar fretboards, available in a variety of sizes and configurations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommended jumbo or super jumbo fretwire for these fretboards.\u003c\/p\u003e\n\u003cp\u003eBlackwood Tek is an innovative new \"green\" material designed as a replacement for ebony and rosewood. It is made from Pinus Radiata softwood (New Zealand Pine), and is treated by pressure and organic materials to produce a strong, dense, hard and uniform timber that is ideal for instrument fretboards. It performs as well as rosewood or ebony, but is FSC certified, made from sustainably sourced renewable plantation grown timber - even the materials used in the special treatment  are derived from pine sawdust. It cuts, planes and sands nicely, and takes fretwire and inlays very well.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hzji-a5fiOg\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e38mm wide, x 6mm thick, 530mm long, for 3 and 4 string cigar box guitars.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlain unslotted blank\u003c\/li\u003e\n\u003cli\u003eFretless with slot for nut 45mm\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets and slotted for 5mm machine screw nut\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, diatonic (dulcimer) fretted, 2 octave  plus zero fret position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe zero fret slot gives you 4 options for the nut installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea) Cut off the fretboard at the zero fret for conventional nut.\u003c\/li\u003e\n\u003cli\u003eb) Slot the fretboard behind the zero fret for Fender style nut.\u003c\/li\u003e\n\u003cli\u003ec) Slot the fretboard centered on the zero fret for machine screw \/ bolt nut.\u003c\/li\u003e\n\u003cli\u003ed) Install a zero fret with a string spacing nut behind. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach slotted fretboard comes with an easy to follow illustrated instruction sheet about these nut installation options. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0402\/0481\/files\/blacktekoiledcomparison_large.jpg?v=1536158559\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe sample on the left has been oiled with our fretboard treatment oil, and you can see that it darkens down considerably, comparable with rosewood. Please note, that because this is a modified natural wood product, not a uniform composite material, so there will be variations in the colour and grain.\u003c\/p\u003e","published_at":"2021-01-20T13:05:19+00:00","created_at":"2018-09-05T14:54:40+01:00","vendor":"chickenbonejohn","type":"Fretboard","tags":["3 String","6 String","Blackwood","Blank","ChickenboneJohn","Cigar Box Guitar","Finger Boards","Fret Board","Fret Boards","Fretboard","Guitar Parts","Handmade","Slotted","Tek"],"price":475,"price_min":475,"price_max":1550,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":11701102903340,"title":"Blank","option1":"Blank","option2":null,"option3":null,"sku":"N0005\/1","requires_shipping":true,"taxable":true,"featured_image":{"id":4078377795628,"product_id":1203742343212,"position":2,"created_at":"2018-09-05T15:26:25+01:00","updated_at":"2022-11-18T16:16:32+00:00","alt":"Blackwood Tek Fretboard, blank for 3 string cigar box guitars.","width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekplain.jpg?v=1668788192","variant_ids":[11701102903340]},"available":true,"name":"Blackwood Tek Fretboards - Blank","public_title":"Blank","options":["Blank"],"price":475,"weight":400,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Blackwood Tek Fretboard, blank for 3 string cigar box guitars.","id":1390558576771,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekplain.jpg?v=1668788192"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11701102936108,"title":"Fretless with slot for nut","option1":"Fretless with slot for nut","option2":null,"option3":null,"sku":"N0005\/2","requires_shipping":true,"taxable":true,"featured_image":{"id":4078385004588,"product_id":1203742343212,"position":3,"created_at":"2018-09-05T15:28:06+01:00","updated_at":"2022-11-18T16:16:47+00:00","alt":"Blackwood Tek Fretboard, blank with nut slot for 3 string cigar box guitars.","width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackteknutslot.jpg?v=1668788207","variant_ids":[11701102936108]},"available":true,"name":"Blackwood Tek Fretboards - Fretless with slot for nut","public_title":"Fretless with slot for nut","options":["Fretless with slot for nut"],"price":500,"weight":400,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Blackwood Tek Fretboard, blank with nut slot for 3 string cigar box guitars.","id":1390558937219,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackteknutslot.jpg?v=1668788207"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11701103001644,"title":"Slotted 24 3\/4\"","option1":"Slotted 24 3\/4\"","option2":null,"option3":null,"sku":"N0018","requires_shipping":true,"taxable":true,"featured_image":{"id":4078392573996,"product_id":1203742343212,"position":4,"created_at":"2018-09-05T15:29:55+01:00","updated_at":"2022-11-18T16:17:02+00:00","alt":"Blackwood Tek Fretboard, slotted for 3 string cigar box guitars.","width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222","variant_ids":[11701102968876,11701103001644]},"available":true,"name":"Blackwood Tek Fretboards - Slotted 24 3\/4\"","public_title":"Slotted 24 3\/4\"","options":["Slotted 24 3\/4\""],"price":1500,"weight":400,"compare_at_price":null,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Blackwood Tek Fretboard, slotted for 3 string cigar box guitars.","id":1390559035523,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11701102968876,"title":"Slotted 25 1\/2\"","option1":"Slotted 25 1\/2\"","option2":null,"option3":null,"sku":"N0016","requires_shipping":true,"taxable":true,"featured_image":{"id":4078392573996,"product_id":1203742343212,"position":4,"created_at":"2018-09-05T15:29:55+01:00","updated_at":"2022-11-18T16:17:02+00:00","alt":"Blackwood Tek Fretboard, slotted for 3 string cigar box guitars.","width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222","variant_ids":[11701102968876,11701103001644]},"available":true,"name":"Blackwood Tek Fretboards - Slotted 25 1\/2\"","public_title":"Slotted 25 1\/2\"","options":["Slotted 25 1\/2\""],"price":1500,"weight":400,"compare_at_price":null,"inventory_quantity":15,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Blackwood Tek Fretboard, slotted for 3 string cigar box guitars.","id":1390559035523,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":11701103034412,"title":"Slotted 25 1\/2\" with nut slot","option1":"Slotted 25 1\/2\" with nut slot","option2":null,"option3":null,"sku":"N0017","requires_shipping":true,"taxable":true,"featured_image":{"id":4078406434860,"product_id":1203742343212,"position":5,"created_at":"2018-09-05T15:32:50+01:00","updated_at":"2022-11-18T16:17:16+00:00","alt":"Blackwood Tek Fretboard, slotted with nut slot for 3 string cigar box guitars.","width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedplusnut.jpg?v=1668788236","variant_ids":[11701103034412]},"available":true,"name":"Blackwood Tek Fretboards - Slotted 25 1\/2\" with nut slot","public_title":"Slotted 25 1\/2\" with nut slot","options":["Slotted 25 1\/2\" with nut slot"],"price":1550,"weight":400,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":"Blackwood Tek Fretboard, slotted with nut slot for 3 string cigar box guitars.","id":1390560510083,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedplusnut.jpg?v=1668788236"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35503606628508,"title":"Diatonic (dulcimer) slotted 24 3\/4\"","option1":"Diatonic (dulcimer) slotted 24 3\/4\"","option2":null,"option3":null,"sku":"N0038","requires_shipping":true,"taxable":true,"featured_image":{"id":38872837128420,"product_id":1203742343212,"position":8,"created_at":"2022-08-12T16:14:11+01:00","updated_at":"2022-11-18T16:18:04+00:00","alt":null,"width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/FretboardBlackwoodDulcimer.jpg?v=1668788284","variant_ids":[35503606628508]},"available":true,"name":"Blackwood Tek Fretboards - Diatonic (dulcimer) slotted 24 3\/4\"","public_title":"Diatonic (dulcimer) slotted 24 3\/4\"","options":["Diatonic (dulcimer) slotted 24 3\/4\""],"price":1500,"weight":400,"compare_at_price":null,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":31447722885348,"position":8,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/FretboardBlackwoodDulcimer.jpg?v=1668788284"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekselection.jpg?v=1668788175","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekplain.jpg?v=1668788192","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackteknutslot.jpg?v=1668788207","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedplusnut.jpg?v=1668788236","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekwide.jpg?v=1668788249","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedwide.jpg?v=1668788268","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/FretboardBlackwoodDulcimer.jpg?v=1668788284"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekselection.jpg?v=1668788175","options":["Material"],"media":[{"alt":"Blackwood Tek Fretboard collection, available blank, slotted for 3 and 6 string guitars.","id":1390564278403,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekselection.jpg?v=1668788175"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekselection.jpg?v=1668788175","width":1500},{"alt":"Blackwood Tek Fretboard, blank for 3 string cigar box guitars.","id":1390558576771,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekplain.jpg?v=1668788192"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekplain.jpg?v=1668788192","width":1500},{"alt":"Blackwood Tek Fretboard, blank with nut slot for 3 string cigar box guitars.","id":1390558937219,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackteknutslot.jpg?v=1668788207"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackteknutslot.jpg?v=1668788207","width":1500},{"alt":"Blackwood Tek Fretboard, slotted for 3 string cigar box guitars.","id":1390559035523,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslotted.jpg?v=1668788222","width":1500},{"alt":"Blackwood Tek Fretboard, slotted with nut slot for 3 string cigar box guitars.","id":1390560510083,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedplusnut.jpg?v=1668788236"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedplusnut.jpg?v=1668788236","width":1500},{"alt":"Blackwood Tek Fretboard, blank for 6 string guitars.","id":1390561263747,"position":6,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekwide.jpg?v=1668788249"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekwide.jpg?v=1668788249","width":1500},{"alt":"Blackwood Tek Fretboard, slotted for 6 string guitars.","id":1390561525891,"position":7,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedwide.jpg?v=1668788268"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blacktekslottedwide.jpg?v=1668788268","width":1500},{"alt":null,"id":31447722885348,"position":8,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/FretboardBlackwoodDulcimer.jpg?v=1668788284"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/FretboardBlackwoodDulcimer.jpg?v=1668788284","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eBlackwood Tek guitar fretboards, available in a variety of sizes and configurations.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommended jumbo or super jumbo fretwire for these fretboards.\u003c\/p\u003e\n\u003cp\u003eBlackwood Tek is an innovative new \"green\" material designed as a replacement for ebony and rosewood. It is made from Pinus Radiata softwood (New Zealand Pine), and is treated by pressure and organic materials to produce a strong, dense, hard and uniform timber that is ideal for instrument fretboards. It performs as well as rosewood or ebony, but is FSC certified, made from sustainably sourced renewable plantation grown timber - even the materials used in the special treatment  are derived from pine sawdust. It cuts, planes and sands nicely, and takes fretwire and inlays very well.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hzji-a5fiOg\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e38mm wide, x 6mm thick, 530mm long, for 3 and 4 string cigar box guitars.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlain unslotted blank\u003c\/li\u003e\n\u003cli\u003eFretless with slot for nut 45mm\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets and slotted for 5mm machine screw nut\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, diatonic (dulcimer) fretted, 2 octave  plus zero fret position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe zero fret slot gives you 4 options for the nut installation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ea) Cut off the fretboard at the zero fret for conventional nut.\u003c\/li\u003e\n\u003cli\u003eb) Slot the fretboard behind the zero fret for Fender style nut.\u003c\/li\u003e\n\u003cli\u003ec) Slot the fretboard centered on the zero fret for machine screw \/ bolt nut.\u003c\/li\u003e\n\u003cli\u003ed) Install a zero fret with a string spacing nut behind. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach slotted fretboard comes with an easy to follow illustrated instruction sheet about these nut installation options. \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg style=\"float: none;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0402\/0481\/files\/blacktekoiledcomparison_large.jpg?v=1536158559\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe sample on the left has been oiled with our fretboard treatment oil, and you can see that it darkens down considerably, comparable with rosewood. Please note, that because this is a modified natural wood product, not a uniform composite material, so there will be variations in the colour and grain.\u003c\/p\u003e"}

{"id":297321629,"title":"Sapele Mahogany Fretboards","handle":"sapele-fretboards","description":"\u003cp\u003eSapele Mahogany fretboards available in a variety of scale lengths.\u003c\/p\u003e\n\u003cp\u003eWe recommended medium or jumbo fretwire for these fretboards.\u003c\/p\u003e\n\u003cp\u003eAll fretboards are 6mm thick, 38mm wide, suitable for 3 string guitars.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlain unslotted blank\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets and slotted for 5mm machine screw nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe zero fret slot gives you 4 options for the nut installation:\u003c\/p\u003e\n\u003cp\u003ea) Cut off the fretboard at the zero fret for conventional nut.\u003c\/p\u003e\n\u003cp\u003eb) Slot the fretboard behind the zero fret for Fender style nut.\u003c\/p\u003e\n\u003cp\u003ec) Slot the fretboard centered on the zero fret for machine screw \/ bolt nut.\u003c\/p\u003e\n\u003cp\u003ed) Install a zero fret with a string spacing nut behind. \u003c\/p\u003e\n\u003cp\u003eEach fretboard comes with an easy to follow illustrated instruction sheet about these nut installation options. \u003c\/p\u003e","published_at":"2022-08-12T17:00:17+01:00","created_at":"2014-04-24T11:51:45+01:00","vendor":"chickenbonejohn","type":"Fretboard","tags":["Blank","ChickenboneJohn","Cigar Box Guitar","Finger Boards","Fret Boards","Fretboard","Guitar Parts","Handmade","Sapele","Slotted","Wood"],"price":650,"price_min":650,"price_max":1480,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":36381284499612,"title":"Blank","option1":"Blank","option2":null,"option3":null,"sku":"N0007\/1","requires_shipping":true,"taxable":true,"featured_image":{"id":38872909873380,"product_id":297321629,"position":2,"created_at":"2022-08-12T16:21:45+01:00","updated_at":"2022-11-19T07:05:38+00:00","alt":null,"width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleblank.jpg?v=1668841538","variant_ids":[36381284499612]},"available":false,"name":"Sapele Mahogany Fretboards - Blank","public_title":"Blank","options":["Blank"],"price":650,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":31447795695844,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleblank.jpg?v=1668841538"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43258527940836,"title":"Slotted 24 3\/4\"","option1":"Slotted 24 3\/4\"","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":{"id":38872910004452,"product_id":297321629,"position":5,"created_at":"2022-08-12T16:21:45+01:00","updated_at":"2022-08-12T16:22:28+01:00","alt":null,"width":2000,"height":1333,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardssapeleslotted243_4.jpg?v=1660317748","variant_ids":[43258527940836]},"available":true,"name":"Sapele Mahogany Fretboards - Slotted 24 3\/4\"","public_title":"Slotted 24 3\/4\"","options":["Slotted 24 3\/4\""],"price":1430,"weight":750,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":31447795794148,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1333,"width":2000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardssapeleslotted243_4.jpg?v=1660317748"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43258527973604,"title":"Slotted 25 1\/2\"","option1":"Slotted 25 1\/2\"","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":{"id":38872910037220,"product_id":297321629,"position":3,"created_at":"2022-08-12T16:21:45+01:00","updated_at":"2022-11-19T07:05:49+00:00","alt":null,"width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted251_2.jpg?v=1668841549","variant_ids":[43258527973604]},"available":false,"name":"Sapele Mahogany Fretboards - Slotted 25 1\/2\"","public_title":"Slotted 25 1\/2\"","options":["Slotted 25 1\/2\""],"price":1430,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":31447795728612,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted251_2.jpg?v=1668841549"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":43258528006372,"title":"Slotted 25 1\/2\" with nut slot","option1":"Slotted 25 1\/2\" with nut slot","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":{"id":38872909512932,"product_id":297321629,"position":4,"created_at":"2022-08-12T16:21:45+01:00","updated_at":"2022-11-19T07:06:01+00:00","alt":null,"width":1500,"height":1000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted_nutslot251_2.jpg?v=1668841561","variant_ids":[43258528006372]},"available":false,"name":"Sapele Mahogany Fretboards - Slotted 25 1\/2\" with nut slot","public_title":"Slotted 25 1\/2\" with nut slot","options":["Slotted 25 1\/2\" with nut slot"],"price":1480,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":31447795761380,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted_nutslot251_2.jpg?v=1668841561"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapelecolltection.jpg?v=1668841530","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleblank.jpg?v=1668841538","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted251_2.jpg?v=1668841549","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted_nutslot251_2.jpg?v=1668841561","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardssapeleslotted243_4.jpg?v=1660317748"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapelecolltection.jpg?v=1668841530","options":["Scale Length"],"media":[{"alt":null,"id":31447801888996,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapelecolltection.jpg?v=1668841530"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapelecolltection.jpg?v=1668841530","width":1500},{"alt":null,"id":31447795695844,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleblank.jpg?v=1668841538"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleblank.jpg?v=1668841538","width":1500},{"alt":null,"id":31447795728612,"position":3,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted251_2.jpg?v=1668841549"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted251_2.jpg?v=1668841549","width":1500},{"alt":null,"id":31447795761380,"position":4,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted_nutslot251_2.jpg?v=1668841561"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardsapeleslotted_nutslot251_2.jpg?v=1668841561","width":1500},{"alt":null,"id":31447795794148,"position":5,"preview_image":{"aspect_ratio":1.5,"height":1333,"width":2000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardssapeleslotted243_4.jpg?v=1660317748"},"aspect_ratio":1.5,"height":1333,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretboardssapeleslotted243_4.jpg?v=1660317748","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSapele Mahogany fretboards available in a variety of scale lengths.\u003c\/p\u003e\n\u003cp\u003eWe recommended medium or jumbo fretwire for these fretboards.\u003c\/p\u003e\n\u003cp\u003eAll fretboards are 6mm thick, 38mm wide, suitable for 3 string guitars.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlain unslotted blank\u003c\/li\u003e\n\u003cli\u003e24\/ 3\/4\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets plus zero fret position\u003c\/li\u003e\n\u003cli\u003e25\/ 1\/2\" scale, slotted with 24 frets and slotted for 5mm machine screw nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe zero fret slot gives you 4 options for the nut installation:\u003c\/p\u003e\n\u003cp\u003ea) Cut off the fretboard at the zero fret for conventional nut.\u003c\/p\u003e\n\u003cp\u003eb) Slot the fretboard behind the zero fret for Fender style nut.\u003c\/p\u003e\n\u003cp\u003ec) Slot the fretboard centered on the zero fret for machine screw \/ bolt nut.\u003c\/p\u003e\n\u003cp\u003ed) Install a zero fret with a string spacing nut behind. \u003c\/p\u003e\n\u003cp\u003eEach fretboard comes with an easy to follow illustrated instruction sheet about these nut installation options. \u003c\/p\u003e"}

{"id":292122409,"title":"Fretwire, Van Gent - Light, 12% Nickel Silver","handle":"fretwire-light","description":"\u003cp\u003e\u003cspan\u003eGreat quality European fretwire, 12% nickel silver. Made by Van Gent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 900mm lengths cut from the roll (supplied in 3x300mm lengths) 1.6mm wide, 0.7mm tall. Ideal for cigar box guitars, ukes, banjos and mandolins. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI'm very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-04-16T12:17:00+01:00","created_at":"2014-04-16T12:19:03+01:00","vendor":"chickenbonejohn","type":"Guitar Parts","tags":["Cigar Box Guitar","Fret Wire","Fretboard","Fretwire","Guitar Parts","Light","Van Gent"],"price":345,"price_min":345,"price_max":345,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":689738793,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"P0017","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fretwire, Van Gent - Light, 12% Nickel Silver","public_title":null,"options":["Default Title"],"price":345,"weight":75,"compare_at_price":null,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirefine.jpg?v=1565268588","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Light.jpg?v=1565268611"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirefine.jpg?v=1565268588","options":["Title"],"media":[{"alt":"Fretwire by Van Gent - Light, 12% Nickel Silver, measurement drawing.","id":6285197356,"position":1,"preview_image":{"aspect_ratio":2.632,"height":223,"width":587,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirefine.jpg?v=1565268588"},"aspect_ratio":2.632,"height":223,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirefine.jpg?v=1565268588","width":587},{"alt":"Fretwire by Van Gent - Light, 12% Nickel Silver","id":6285230124,"position":2,"preview_image":{"aspect_ratio":1.5,"height":2848,"width":4272,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Light.jpg?v=1565268611"},"aspect_ratio":1.5,"height":2848,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Light.jpg?v=1565268611","width":4272}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eGreat quality European fretwire, 12% nickel silver. Made by Van Gent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 900mm lengths cut from the roll (supplied in 3x300mm lengths) 1.6mm wide, 0.7mm tall. Ideal for cigar box guitars, ukes, banjos and mandolins. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI'm very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":292123457,"title":"Fretwire, Van Gent - Medium 18% Nickel Silver","handle":"fretwire-medium","description":"\u003cp\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver. Made by Van Gent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2mm wide, 1.1mm tall. Ideal for cigar box guitars. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI'm very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is our most popular fretwire.\u003c\/p\u003e","published_at":"2014-04-16T13:18:00+01:00","created_at":"2014-04-16T12:20:16+01:00","vendor":"chickenbonejohn","type":"Guitar Parts","tags":["Cigar Box Guitar","Fret Wire","Fretboard","Fretwire","Guitar Parts","Medium","Van Gent"],"price":365,"price_min":365,"price_max":365,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":689740593,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"P0018","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fretwire, Van Gent - Medium 18% Nickel Silver","public_title":null,"options":["Default Title"],"price":365,"weight":75,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwire_med.jpg?v=1565268714","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Medium.jpg?v=1668788501"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwire_med.jpg?v=1565268714","options":["Title"],"media":[{"alt":"Fretwire by Van Gent - Medium 18% Nickel Silver, measurement drawing.","id":6285262892,"position":1,"preview_image":{"aspect_ratio":2.632,"height":223,"width":587,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwire_med.jpg?v=1565268714"},"aspect_ratio":2.632,"height":223,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwire_med.jpg?v=1565268714","width":587},{"alt":"Fretwire by Van Gent - Medium 18% Nickel Silver","id":6285295660,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Medium.jpg?v=1668788501"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Medium.jpg?v=1668788501","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver. Made by Van Gent.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAvailable in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2mm wide, 1.1mm tall. Ideal for cigar box guitars. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI'm very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is our most popular fretwire.\u003c\/p\u003e"}

{"id":292984985,"title":"Fretwire, Van Gent - Jumbo 18% Nickel Silver","handle":"fretwire-jumbo","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver made by Van Gent. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e Available in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2.5mm wide, 1.1mm tall. A 900 length will easily do a full neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWe are very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis is our favourite fretwire choice which we use in many of our guitars. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2021-02-25T07:10:39+00:00","created_at":"2014-04-17T10:47:52+01:00","vendor":"chickenbonejohn","type":"Guitar Parts","tags":["Cigar Box Guitar","Fret Wire","Fretboard","Fretwire","Guitar Parts","Jumbo","Van Gent"],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":692979217,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"P0019","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fretwire, Van Gent - Jumbo 18% Nickel Silver","public_title":null,"options":["Default Title"],"price":410,"weight":75,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirejumbo.jpg?v=1565268781","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Jumbo.jpg?v=1668788319"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirejumbo.jpg?v=1565268781","options":["Title"],"media":[{"alt":"Fretwire by Van Gent - Jumbo 18% Nickel Silver, measurement drawing.","id":6305054764,"position":1,"preview_image":{"aspect_ratio":2.632,"height":223,"width":587,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirejumbo.jpg?v=1565268781"},"aspect_ratio":2.632,"height":223,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/fretwirejumbo.jpg?v=1565268781","width":587},{"alt":"Fretwire by Van Gent - Jumbo 18% Nickel Silver","id":6305087532,"position":2,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Jumbo.jpg?v=1668788319"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_Jumbo.jpg?v=1668788319","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver made by Van Gent. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e Available in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2.5mm wide, 1.1mm tall. A 900 length will easily do a full neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWe are very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis is our favourite fretwire choice which we use in many of our guitars. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}

{"id":8494538577,"title":"Fretwire, Van Gent - Xtra Jumbo 18% Nickel Silver","handle":"fretwire-xtra-jumbo","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver made by Van Gent. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e Available in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2.7mm wide, 0.9mm tall. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWe are very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2014-04-17T10:47:00+01:00","created_at":"2017-01-20T09:46:16+00:00","vendor":"chickenbonejohn","type":"Guitar Parts","tags":["Cigar Box Guitar","Fret Wire","Fretboard","Fretwire","Guitar Parts","Van Gent","Xtra Jumbo"],"price":445,"price_min":445,"price_max":445,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28841129361,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"P0020","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fretwire, Van Gent - Xtra Jumbo 18% Nickel Silver","public_title":null,"options":["Default Title"],"price":445,"weight":75,"compare_at_price":null,"inventory_quantity":34,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/27.jpg?v=1565268858","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_XJumbo.jpg?v=1565268913"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/27.jpg?v=1565268858","options":["Title"],"media":[{"alt":"Fretwire by Van Gent - Xtra Jumbo 18% Nickel Silver, measurement drawing.","id":140555616300,"position":1,"preview_image":{"aspect_ratio":2.632,"height":223,"width":587,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/27.jpg?v=1565268858"},"aspect_ratio":2.632,"height":223,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/27.jpg?v=1565268858","width":587},{"alt":"Fretwire by Van Gent - Xtra Jumbo 18% Nickel Silver","id":140555649068,"position":2,"preview_image":{"aspect_ratio":1.5,"height":2848,"width":4272,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_XJumbo.jpg?v=1565268913"},"aspect_ratio":1.5,"height":2848,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Fretwire_XJumbo.jpg?v=1565268913","width":4272}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eGreat quality European fretwire, 18% nickel silver made by Van Gent. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e Available in 900mm lengths cut from the roll (supplied as 3 x 300mm). 2.7mm wide, 0.9mm tall. A 900 length will easily do a full cigar box guitar neck, provided you cut each fret to length accurately. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eWe are very pleased to be able to offer this EU-made quality fretwire as an alternative to the Far-Eastern products.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}

{"id":4338678020,"title":"Neck blank - Poplar","handle":"neck-blank-poplar","description":"\u003cp\u003eEasy to work, Poplar is an ideal wood for beginners to try their hand at making a cigar box guitar neck. Cuts, shapes and sands easily. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlso known as tulipwood or yellow poplar\u003c\/p\u003e\n\u003cp\u003e36 x 24 x 900mm - ideal for 3 string guitars.\u003c\/p\u003e","published_at":"2014-12-18T13:43:00+00:00","created_at":"2016-02-05T11:23:59+00:00","vendor":"chickenbonejohn","type":"Guitar Neck","tags":["ChickenboneJohn","Cigar Box Guitar","Guitar Parts","Handmade","Neck Blanks","Necks","Poplar","Wood"],"price":750,"price_min":750,"price_max":750,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":14452256068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"N0021","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neck blank - Poplar","public_title":null,"options":["Default Title"],"price":750,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Poplar_neck_blank.jpg?v=1668840283"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Poplar_neck_blank.jpg?v=1668840283","options":["Title"],"media":[{"alt":"Yellow poplar neck blank, 36 x 24 x 900mm, ideal for 3 string cigar box guitars.","id":102681739308,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Poplar_neck_blank.jpg?v=1668840283"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Poplar_neck_blank.jpg?v=1668840283","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eEasy to work, Poplar is an ideal wood for beginners to try their hand at making a cigar box guitar neck. Cuts, shapes and sands easily. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAlso known as tulipwood or yellow poplar\u003c\/p\u003e\n\u003cp\u003e36 x 24 x 900mm - ideal for 3 string guitars.\u003c\/p\u003e"}

{"id":299330077,"title":"Neck blank - Cherry","handle":"neck-wood-cherry","description":"\u003cp\u003eEasy to work, stable and close grained, cherry is a great wood for making a cigar box guitar necks. It is a pleasure to work, as it cuts, carves, shapes and sands well. It also takes a finish beautifully - my favorite wood for necks.\u003c\/p\u003e\n\u003cp\u003eAvailable for 4 and 3 string guitars.\u003c\/p\u003e\n\u003cp\u003e3 string - 36 x 22 x 900mm\u003c\/p\u003e\n\u003cp\u003e4 string - 42 x 22 x 900mm\u003c\/p\u003e","published_at":"2017-02-24T07:42:00+00:00","created_at":"2014-04-28T12:56:56+01:00","vendor":"chickenbonejohn","type":"Guitar Neck","tags":["3 String","4 String","Cherry","Cigar Box Guitar","Guitar Parts","Handmade","Neck Blanks","Necks","Wood"],"price":1375,"price_min":1375,"price_max":1600,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35614616748188,"title":"3 string","option1":"3 string","option2":null,"option3":null,"sku":"N0023","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neck blank - Cherry - 3 string","public_title":"3 string","options":["3 string"],"price":1375,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35614616813724,"title":"4 string","option1":"4 string","option2":null,"option3":null,"sku":"N0023\/1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neck blank - Cherry - 4 string","public_title":"4 string","options":["4 string"],"price":1600,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/cherryblank.jpg?v=1668790026"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/cherryblank.jpg?v=1668790026","options":["Size"],"media":[{"alt":"Cherry wood neck blank, 42 x 22 x 900mm, ideal for 4 and 3 string cigar box guitars.","id":6437077036,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1000,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/cherryblank.jpg?v=1668790026"},"aspect_ratio":1.5,"height":1000,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/cherryblank.jpg?v=1668790026","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eEasy to work, stable and close grained, cherry is a great wood for making a cigar box guitar necks. It is a pleasure to work, as it cuts, carves, shapes and sands well. It also takes a finish beautifully - my favorite wood for necks.\u003c\/p\u003e\n\u003cp\u003eAvailable for 4 and 3 string guitars.\u003c\/p\u003e\n\u003cp\u003e3 string - 36 x 22 x 900mm\u003c\/p\u003e\n\u003cp\u003e4 string - 42 x 22 x 900mm\u003c\/p\u003e"}

{"id":945809588268,"title":"Neck blank - Sapele","handle":"neck-blank-sapele","description":"\u003cp\u003eEasy to work and strong, sapele is a great wood for making a cigar box guitar necks. It cuts, carves, shapes and sands well. It also takes a finish nicely.\u003c\/p\u003e\n\u003cp\u003e36 x 22 x 900mm - ideal for 3 string guitars.\u003c\/p\u003e\n\u003cp\u003e42 x 22 x 900mm - ideal for 4 string guitars.\u003c\/p\u003e","published_at":"2021-03-01T15:38:58+00:00","created_at":"2018-05-27T11:28:34+01:00","vendor":"chickenbonejohn","type":"Guitar Neck","tags":["3 String","Cigar Box Guitar","Guitar Parts","Handmade","Neck Blanks","Necks","Sapele","Wood"],"price":1500,"price_min":1500,"price_max":1600,"available":false,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39622242205852,"title":"36 x 22 for 3 string","option1":"36 x 22 for 3 string","option2":null,"option3":null,"sku":"N0022","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neck blank - Sapele - 36 x 22 for 3 string","public_title":"36 x 22 for 3 string","options":["36 x 22 for 3 string"],"price":1500,"weight":750,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39622242238620,"title":"42 x 22 for 4 string","option1":"42 x 22 for 4 string","option2":null,"option3":null,"sku":"N0022\/1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neck blank - Sapele - 42 x 22 for 4 string","public_title":"42 x 22 for 4 string","options":["42 x 22 for 4 string"],"price":1600,"weight":750,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/sapeleblank.jpg?v=1565269196"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/sapeleblank.jpg?v=1565269196","options":["Size"],"media":[{"alt":"Sapele mahogany, 36 x 22 x 900mm, ideal for 3 string cigar box guitars.","id":811940642947,"position":1,"preview_image":{"aspect_ratio":1.5,"height":2848,"width":4272,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/sapeleblank.jpg?v=1565269196"},"aspect_ratio":1.5,"height":2848,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/sapeleblank.jpg?v=1565269196","width":4272}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eEasy to work and strong, sapele is a great wood for making a cigar box guitar necks. It cuts, carves, shapes and sands well. It also takes a finish nicely.\u003c\/p\u003e\n\u003cp\u003e36 x 22 x 900mm - ideal for 3 string guitars.\u003c\/p\u003e\n\u003cp\u003e42 x 22 x 900mm - ideal for 4 string guitars.\u003c\/p\u003e"}

{"id":6731722719388,"title":"Jack socket plate - Black","handle":"jack-plate-black","description":"\u003cp\u003eA neat jack plate, ideal for installing a jack socket in thick-walled boxes. Simply drill a  hole for the whole of the jack socket to pass through, fit the jack socket (not included) and fix with the 4 screws provided.\u003c\/p\u003e\n\u003cp\u003eBlack plastic 32mm x 32mm with black screws.\u003c\/p\u003e","published_at":"2021-05-11T08:53:26+01:00","created_at":"2021-05-11T08:52:28+01:00","vendor":"ChickenboneJohn Guitars","type":"","tags":["Black","ChickenboneJohn","Cigar Box Guitar","Guitar Parts","Hardware","Plastic"],"price":175,"price_min":175,"price_max":175,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39880158904476,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"P0059","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Jack socket plate - Black","public_title":null,"options":["Default Title"],"price":175,"weight":50,"compare_at_price":null,"inventory_quantity":17,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjack.jpg?v=1668839344","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjackinsitu.jpg?v=1620719550"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjack.jpg?v=1668839344","options":["Title"],"media":[{"alt":null,"id":22125694419100,"position":1,"preview_image":{"aspect_ratio":1.481,"height":1013,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjack.jpg?v=1668839344"},"aspect_ratio":1.481,"height":1013,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjack.jpg?v=1668839344","width":1500},{"alt":null,"id":22125694484636,"position":2,"preview_image":{"aspect_ratio":1.43,"height":1399,"width":2000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjackinsitu.jpg?v=1620719550"},"aspect_ratio":1.43,"height":1399,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/blackjackinsitu.jpg?v=1620719550","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eA neat jack plate, ideal for installing a jack socket in thick-walled boxes. Simply drill a  hole for the whole of the jack socket to pass through, fit the jack socket (not included) and fix with the 4 screws provided.\u003c\/p\u003e\n\u003cp\u003eBlack plastic 32mm x 32mm with black screws.\u003c\/p\u003e"}

{"id":6211328388,"title":"Steel jack socket plate","handle":"stainless-steel-jack-plate","description":"\u003cp\u003eExclusive to Chickenbone John, designed and manufactured in the UK. Made from chunky 1.5 mm steel. The jack plate is part of a suite of matching parts - check our other listings for t \u0026amp; v control plate and the \"Ace of Spades\" tailpiece.\u003c\/p\u003e\n\u003cp\u003eSupplied with steel fixing screws.\u003c\/p\u003e\n\u003cp\u003ePlain square (33mm  x 33mm)\u003c\/p\u003e\n\u003cp\u003eAvailable in hand polished stainless steel,  blued oil quenched steel or patinated rusted steel  with clear coat finish.\u003c\/p\u003e","published_at":"2016-07-06T14:12:00+01:00","created_at":"2016-07-05T16:33:41+01:00","vendor":"chickenbonejohn","type":"Guitar Parts","tags":["Blued","ChickenboneJohn","Cigar Box Guitar","Guitar Parts","Hardware","Rusted","Stainless Steel"],"price":350,"price_min":350,"price_max":350,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":21256725188,"title":"Plain square","option1":"Plain square","option2":null,"option3":null,"sku":"P0060","requires_shipping":true,"taxable":true,"featured_image":{"id":29872561193116,"product_id":6211328388,"position":2,"created_at":"2021-05-13T17:01:37+01:00","updated_at":"2022-11-19T07:12:59+00:00","alt":null,"width":1500,"height":994,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackstainless.jpg?v=1668841979","variant_ids":[21256725188]},"available":true,"name":"Steel jack socket plate - Plain square","public_title":"Plain square","options":["Plain square"],"price":350,"weight":100,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":22170317422748,"position":2,"preview_image":{"aspect_ratio":1.509,"height":994,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackstainless.jpg?v=1668841979"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":9363659489324,"title":"Plain square blued steel","option1":"Plain square blued steel","option2":null,"option3":null,"sku":"P0061","requires_shipping":true,"taxable":true,"featured_image":{"id":29872561356956,"product_id":6211328388,"position":3,"created_at":"2021-05-13T17:01:37+01:00","updated_at":"2022-11-19T07:13:09+00:00","alt":null,"width":1500,"height":1049,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jaxckblued.jpg?v=1668841989","variant_ids":[9363659489324]},"available":true,"name":"Steel jack socket plate - Plain square blued steel","public_title":"Plain square blued steel","options":["Plain square blued steel"],"price":350,"weight":100,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":22170317455516,"position":3,"preview_image":{"aspect_ratio":1.43,"height":1049,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jaxckblued.jpg?v=1668841989"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":9363660963884,"title":"Plain square rusted steel","option1":"Plain square rusted steel","option2":null,"option3":null,"sku":"P0062","requires_shipping":true,"taxable":true,"featured_image":{"id":29872561422492,"product_id":6211328388,"position":4,"created_at":"2021-05-13T17:01:38+01:00","updated_at":"2021-05-13T17:02:16+01:00","alt":null,"width":2000,"height":1298,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackrust.jpg?v=1620921736","variant_ids":[9363660963884]},"available":false,"name":"Steel jack socket plate - Plain square rusted steel","public_title":"Plain square rusted steel","options":["Plain square rusted steel"],"price":350,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":22170317488284,"position":4,"preview_image":{"aspect_ratio":1.541,"height":1298,"width":2000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackrust.jpg?v=1620921736"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jacktrio.jpg?v=1668841971","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackstainless.jpg?v=1668841979","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jaxckblued.jpg?v=1668841989","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackrust.jpg?v=1620921736","\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Jack_Plate_in_use.jpg?v=1620921736"],"featured_image":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jacktrio.jpg?v=1668841971","options":["Style"],"media":[{"alt":null,"id":22170317389980,"position":1,"preview_image":{"aspect_ratio":1.43,"height":1049,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jacktrio.jpg?v=1668841971"},"aspect_ratio":1.43,"height":1049,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jacktrio.jpg?v=1668841971","width":1500},{"alt":null,"id":22170317422748,"position":2,"preview_image":{"aspect_ratio":1.509,"height":994,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackstainless.jpg?v=1668841979"},"aspect_ratio":1.509,"height":994,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackstainless.jpg?v=1668841979","width":1500},{"alt":null,"id":22170317455516,"position":3,"preview_image":{"aspect_ratio":1.43,"height":1049,"width":1500,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jaxckblued.jpg?v=1668841989"},"aspect_ratio":1.43,"height":1049,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jaxckblued.jpg?v=1668841989","width":1500},{"alt":null,"id":22170317488284,"position":4,"preview_image":{"aspect_ratio":1.541,"height":1298,"width":2000,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackrust.jpg?v=1620921736"},"aspect_ratio":1.541,"height":1298,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/jackrust.jpg?v=1620921736","width":2000},{"alt":"Stainless Steel Jack Socket Plate, plain square on cigar box guitar, provided with fixing screws.","id":115064832044,"position":5,"preview_image":{"aspect_ratio":1.5,"height":2848,"width":4272,"src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Jack_Plate_in_use.jpg?v=1620921736"},"aspect_ratio":1.5,"height":2848,"media_type":"image","src":"\/\/www.chickenbonejohn.com\/cdn\/shop\/products\/Jack_Plate_in_use.jpg?v=1620921736","width":4272}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eExclusive to Chickenbone John, designed and manufactured in the UK. Made from chunky 1.5 mm steel. The jack plate is part of a suite of matching parts - check our other listings for t \u0026amp; v control plate and the \"Ace of Spades\" tailpiece.\u003c\/p\u003e\n\u003cp\u003eSupplied with steel fixing screws.\u003c\/p\u003e\n\u003cp\u003ePlain square (33mm  x 33mm)\u003c\/p\u003e\n\u003cp\u003eAvailable in hand polished stainless steel,  blued oil quenched steel or patinated rusted steel  with clear coat finish.\u003c\/p\u003e"}